1. Open the cutting software (double click)
2. Under normal circumstances, the software will pop up a prompt to return to the origin of the dialog box, click back to the origin, at this time the machine will be in accordance with the set process, the height of the first back to the origin, we see that the laser head will be lifted, the three axis induction to the upper limit back to the back distance, and then the focus and X, Y axis back to the origin at the same time. Also after sensing the limit switch, back to the specified back distance position to complete the return to the origin action.
3. There is an alarm after the boot, no prompt back to the origin dialog box, after lifting the alarm, click the NC, find the origin option, select all back to the origin.
4. The purpose of the operation back to the origin is to find the mechanical coordinate origin of the machine tool, that is, the machine tool X, Y, Z axis mechanical O coordinate stroke.
5. Not returning to the origin may cause the position of the laser head to dock after the boot to default to the coordinate origin of the machine, resulting in inaccurate travel and other problems.